• Kérjük másold be a hiba üzenetet, amit kaptál, ha volt ilyen.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Kérjük mondd el, hogy mit szerettél volna csinálni, mit csináltál és mi történt

• Milyen böngészőt használsz?

• Kérjük, másold az angolul megjelenített szöveget, ahelyett, hogy lefordítanád a Te nyelvedre! Ha van screenshot-od erről a bugról (ajánlott), használd a Imgur.com, hogy feltöltsd, majd másold be a linket.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Létezik ez a szöveg a fordítási rendszerben? Ha igen, több mint 24 órája lett lefordítva?

• Milyen böngészőt használsz?

• Kérjük magyarázd el a javaslatodat pontosan és tömören, hogy amennyire lehet, könnyen érthető legyen, mire is gondolsz!

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Milyen böngészőt használsz?

• Mit láttál a képernyőn, amikor blokkolva lettél? (Üres képernyő? A játék felületének egy részét? Hiba üzenet?)

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Milyen böngészőt használsz?

• A szabályok melyik részét nem vette figyelembe a BGA adaptáció

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Ez a szabály áthágása látható a visszajátszásban? Ha igen, melyik lépésszámnál?

• Milyen böngészőt használsz?

• Melyik játékbeli akciót akartad csinálni, amikor a hiba előjött?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mit akartál csinálni, hogy ezt a játékbeli akciót elindíthasd?

• Mi történt amikor megpróbáltad ezt (hiba üzenet, játék státusz üzenet, ...)?

• Milyen böngészőt használsz?

• A játék melyik lépésénél lépett fel a probléma? (mi volt a kiírt utasítás?)

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mi történt amikor megpróbáltad ezt az akciót (hiba üzenet, játék státusz üzenet, ...)?

• Milyen böngészőt használsz?

• Kérjük, írd le a megjelenítési hibát! Ha van screenshot-od erről a bugról (ajánlott), használd a Imgur.com, hogy feltöltsd, majd másold be a linket.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Milyen böngészőt használsz?

• Kérjük, másold az angolul megjelenített szöveget, ahelyett, hogy lefordítanád a Te nyelvedre! Ha van screenshot-od erről a bugról (ajánlott), használd a Imgur.com, hogy feltöltsd, majd másold be a linket.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Létezik ez a szöveg a fordítási rendszerben? Ha igen, több mint 24 órája lett lefordítva?

• Milyen böngészőt használsz?

• Kérjük magyarázd el a javaslatodat pontosan és tömören, hogy amennyire lehet, könnyen érthető legyen, mire is gondolsz!

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Milyen böngészőt használsz?