• Kérjük másold be a hiba üzenetet, amit kaptál, ha volt ilyen.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Kérjük mondd el, hogy mit szerettél volna csinálni, mit csináltál és mi történt

• Milyen böngészőt használsz?

• Kérjük, másold az angolul megjelenített szöveget, ahelyett, hogy lefordítanád a Te nyelvedre! Ha van screenshot-od erről a bugról (ajánlott), használd a Imgur.com, hogy feltöltsd, majd másold be a linket.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Létezik ez a szöveg a fordítási rendszerben? Ha igen, több mint 24 órája lett lefordítva?

• Milyen böngészőt használsz?

• Kérjük magyarázd el a javaslatodat pontosan és tömören, hogy amennyire lehet, könnyen érthető legyen, mire is gondolsz!

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Milyen böngészőt használsz?

• Mit láttál a képernyőn, amikor blokkolva lettél? (Üres képernyő? A játék felületének egy részét? Hiba üzenet?)

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Milyen böngészőt használsz?

• A szabályok melyik részét nem vette figyelembe a BGA adaptáció

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Ez a szabály áthágása látható a visszajátszásban? Ha igen, melyik lépésszámnál?

• Milyen böngészőt használsz?

• Melyik játékbeli akciót akartad csinálni, amikor a hiba előjött?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mit akartál csinálni, hogy ezt a játékbeli akciót elindíthasd?

• Mi történt amikor megpróbáltad ezt (hiba üzenet, játék státusz üzenet, ...)?

• Milyen böngészőt használsz?

• A játék melyik lépésénél lépett fel a probléma? (mi volt a kiírt utasítás?)

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mi történt amikor megpróbáltad ezt az akciót (hiba üzenet, játék státusz üzenet, ...)?

• Milyen böngészőt használsz?

• Kérjük, írd le a megjelenítési hibát! Ha van screenshot-od erről a bugról (ajánlott), használd a Imgur.com, hogy feltöltsd, majd másold be a linket.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Milyen böngészőt használsz?

• Kérjük, másold az angolul megjelenített szöveget, ahelyett, hogy lefordítanád a Te nyelvedre! Ha van screenshot-od erről a bugról (ajánlott), használd a Imgur.com, hogy feltöltsd, majd másold be a linket.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Létezik ez a szöveg a fordítási rendszerben? Ha igen, több mint 24 órája lett lefordítva?

• Milyen böngészőt használsz?

• Kérjük magyarázd el a javaslatodat pontosan és tömören, hogy amennyire lehet, könnyen érthető legyen, mire is gondolsz!

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Milyen böngészőt használsz?